Release:5.20灰测
This commit is contained in:
148
Core/Middlewares/Third_Party/Ykc/charger_to_server.c
vendored
148
Core/Middlewares/Third_Party/Ykc/charger_to_server.c
vendored
@@ -1,148 +0,0 @@
|
||||
#include "global.h"
|
||||
#include "charger_to_server.h"
|
||||
|
||||
uint16_t pack_serial = 0;
|
||||
|
||||
// 充电桩登录认证
|
||||
void charger_to_server_0X01(uint8_t stake_index)
|
||||
{
|
||||
PACK_DATA_0X01 data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial); // 加载充电桩序列号
|
||||
data.charger_type = g_charger_manager.charger_piles[stake_index - 1].login_info.charger_type;
|
||||
data.gun_num = g_charger_manager.charger_piles[stake_index - 1].login_info.gun_num;
|
||||
data.protocol_ver = g_charger_manager.charger_piles[stake_index - 1].login_info.protocol_ver;
|
||||
memcpy(data.software_ver, g_charger_manager.charger_piles[stake_index - 1].login_info.software_ver, 8);
|
||||
data.net_conn_type = g_charger_manager.charger_piles[stake_index - 1].login_info.net_conn_type;
|
||||
data.tele_factory = g_charger_manager.charger_piles[stake_index - 1].login_info.tele_factory;
|
||||
memcpy(data.sim, g_charger_manager.charger_piles[stake_index - 1].login_info.sim, 10);
|
||||
printf("北向：对电桩 %d 发送登录认证，序列号：%s\r\n", stake_index, data.charger_serial);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X01, (uint8_t *)&data, sizeof(PACK_DATA_0X01), stake_index);
|
||||
}
|
||||
|
||||
void charger_to_server_0X03(uint8_t stake_index, uint8_t gun_index, uint8_t gun_status)
|
||||
{
|
||||
PACK_DATA_0X03 data = {0};
|
||||
|
||||
load_charger_serial(stake_index, data.charger_serial); // 加载充电桩序列号
|
||||
data.gun_index = gun_index;
|
||||
data.gun_status = gun_status;
|
||||
printf("北向：对电桩 %d 发送心跳请求，枪号：%d，状态：%d\r\n", stake_index, gun_index, gun_status);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X03, (uint8_t *)&data, sizeof(PACK_DATA_0X03), stake_index);
|
||||
}
|
||||
|
||||
// 计费模型验证请求
|
||||
void charger_to_server_0X05(uint16_t num, uint8_t stake_index)
|
||||
{
|
||||
PACK_DATA_0X05 data = {0};
|
||||
|
||||
load_charger_serial(stake_index, data.charger_serial); // 加载充电桩序列号
|
||||
data.fee_model_no = num;
|
||||
printf("北向：对电桩 %d 计费模型验证请求，模型号：%d\r\n", stake_index, num);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X05, (uint8_t *)&data, sizeof(PACK_DATA_0X05), stake_index);
|
||||
}
|
||||
|
||||
// 充电桩计费模型请求
|
||||
void charger_to_server_0X09(uint8_t stake_index)
|
||||
{
|
||||
PACK_DATA_0X09 data = {0};
|
||||
|
||||
load_charger_serial(stake_index, data.charger_serial); // 加载充电桩序列号
|
||||
printf("北向：对电桩 %d 计费模型请求，序列号：%s\r\n", stake_index, data.charger_serial);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X09, (uint8_t *)&data, sizeof(PACK_DATA_0X09), stake_index);
|
||||
}
|
||||
|
||||
// 上传实时监测数据
|
||||
void charger_to_server_0X13(uint8_t stake_index, uint8_t gun_index)
|
||||
{
|
||||
PACK_DATA_0X13 data = {0};
|
||||
ChargerGun *gun = &g_charger_manager.charger_piles[stake_index - 1].guns[gun_index - 1]; // 获取枪指针
|
||||
data = gun->real_time_data;// 复制结构体
|
||||
// 覆盖需要重新加载的字段
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
load_trade_serial(stake_index, gun_index, data.trade_serial);
|
||||
data.gun_index = gun_index;
|
||||
|
||||
// 根据状态清零特定字段
|
||||
if (data.status == 0x01 || data.status == 0x02||data.status == 0x00)
|
||||
{
|
||||
memset(data.trade_serial, 0, sizeof(data.trade_serial));
|
||||
data.out_voltage = 0;
|
||||
data.out_current = 0;
|
||||
data.charge_energy = 0;
|
||||
data.charge_time = 0;
|
||||
data.charge_money = 0;
|
||||
data.hard_fault = 0;
|
||||
}
|
||||
|
||||
pack_and_send_server_data(FRAME_TYPE_0X13, (uint8_t *)&data, sizeof(PACK_DATA_0X13), stake_index);
|
||||
}
|
||||
|
||||
// 充电结束上报
|
||||
void charger_to_server_0X19(uint8_t stake_index, uint8_t gun_index)
|
||||
{
|
||||
PACK_DATA_0X19 data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
load_trade_serial(stake_index, gun_index, data.trade_serial);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X19, (uint8_t *)&data, sizeof(PACK_DATA_0X19), stake_index);
|
||||
}
|
||||
|
||||
// 平台启动回复
|
||||
void charger_to_server_0X33(uint8_t stake_index, uint8_t gun_index, uint8_t result, uint8_t err_code)
|
||||
{
|
||||
PACK_DATA_0X33 data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
load_trade_serial(stake_index, gun_index, data.trade_serial);
|
||||
data.gun_index = gun_index;
|
||||
data.result = result;
|
||||
data.err_code = err_code;
|
||||
|
||||
uint8_t *trade_serial = g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.trade_serial;
|
||||
|
||||
printf("回复订单ID: ");
|
||||
for (int i = 0; i < 16; i++)
|
||||
{
|
||||
printf("%02X", trade_serial[i]);
|
||||
}
|
||||
printf("\r\n");
|
||||
|
||||
printf("北向：对电桩 %d 的平台启动回复，结果：%d，错误码：%d\r\n", stake_index, result, err_code);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X33, (uint8_t *)&data, sizeof(PACK_DATA_0X33), stake_index);
|
||||
}
|
||||
// 平台停机回复
|
||||
void charger_to_server_0X35(uint8_t stake_index, uint8_t gun_index, uint8_t result, uint8_t err_code)
|
||||
{
|
||||
PACK_DATA_0X35 data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
data.gun_index = gun_index;
|
||||
data.result = result;
|
||||
data.err_code = err_code;
|
||||
|
||||
printf("北向：对电桩 %d 的平台停机回复，结果：%d，错误码：%d\r\n", stake_index, result, err_code);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X35, (uint8_t *)&data, sizeof(PACK_DATA_0X35), stake_index);
|
||||
}
|
||||
|
||||
|
||||
// 上传交易记录
|
||||
void charger_to_server_0X3B(uint8_t stake_index, uint8_t gun_index)
|
||||
{
|
||||
PACK_DATA_0X3B data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
load_trade_serial(stake_index, gun_index, data.trade_serial);
|
||||
data.gun_index = gun_index;
|
||||
|
||||
|
||||
|
||||
|
||||
pack_and_send_server_data(FRAME_TYPE_0X3B, (uint8_t *)&data, sizeof(PACK_DATA_0X3B), stake_index);
|
||||
}
|
||||
|
||||
// 计费模型主动更新回复
|
||||
void charger_to_server_0x57(uint8_t stake_index)
|
||||
{
|
||||
PACK_DATA_0X57 data = {0};
|
||||
load_charger_serial(stake_index, data.charger_serial);
|
||||
data.result = 0x01;
|
||||
|
||||
printf("北向：对电桩 %d 的计费模型主动更新回复\r\n", stake_index);
|
||||
pack_and_send_server_data(FRAME_TYPE_0X57, (uint8_t *)&data, sizeof(PACK_DATA_0X57), stake_index);
|
||||
}
|
||||
@@ -1,57 +0,0 @@
|
||||
#ifndef __CHARGER_TO_SERVER_H__
|
||||
#define __CHARGER_TO_SERVER_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "server_common.h"
|
||||
extern uint16_t pack_serial;
|
||||
|
||||
|
||||
uint32_t get_current_rtc_sec();
|
||||
|
||||
//充电桩登录认证请求
|
||||
extern void charger_to_server_0X01(uint8_t stake_index);
|
||||
|
||||
//充电桩心跳包
|
||||
extern void charger_to_server_0X03(uint8_t stake_index,uint8_t gun_index,uint8_t gun_status);
|
||||
|
||||
//计费模型验证请求
|
||||
extern void charger_to_server_0X05(uint16_t num,uint8_t stake_index);
|
||||
|
||||
//充电桩计费模型请求
|
||||
extern void charger_to_server_0X09(uint8_t stake_index);
|
||||
|
||||
//上传实时监测数据
|
||||
extern void charger_to_server_0X13(uint8_t stake_index,uint8_t gun_index);
|
||||
|
||||
// 充电结束
|
||||
extern void charger_to_server_0X19(uint8_t stake_index,uint8_t gun_index);
|
||||
|
||||
// 报文被改为A5，A8
|
||||
extern void charger_to_server_0X33(uint8_t stake_index,uint8_t gun_index,uint8_t result,uint8_t err_code);
|
||||
extern void charger_to_server_0X35(uint8_t stake_index, uint8_t gun_index, uint8_t result, uint8_t err_code);
|
||||
|
||||
extern void charger_to_server_0x3B(uint8_t gun_index,uint32_t card_id,uint8_t trade_flag,uint8_t stop_reason); //3B改为3D
|
||||
|
||||
//余额更新应答
|
||||
void charger_to_server_0X41(uint8_t * card_id, uint8_t result) ;
|
||||
|
||||
//对时设置应答
|
||||
extern void charger_to_server_0X55(uint32_t time);
|
||||
|
||||
|
||||
//计费模型应答
|
||||
extern void charger_to_server_0X57(uint8_t stake_index);
|
||||
extern uint8_t get_real_status_for_server(uint8_t idx);
|
||||
|
||||
//远程启机命令回复
|
||||
extern void charger_to_server_0XA7(uint8_t gun_index,uint8_t start_result,uint8_t fail_reson);
|
||||
|
||||
|
||||
//交易记录
|
||||
void charger_to_server_0x3D(uint8_t gun_index,uint32_t card_id,uint8_t trade_flag,uint8_t stop_reason);
|
||||
|
||||
|
||||
//远程重启应答
|
||||
void charger_to_server_0X91(uint8_t result);
|
||||
#endif
|
||||
|
||||
322
Core/Middlewares/Third_Party/Ykc/server_common.c
vendored
322
Core/Middlewares/Third_Party/Ykc/server_common.c
vendored
@@ -1,322 +0,0 @@
|
||||
#if 1
|
||||
#include "global.h"
|
||||
#include "server_common.h"
|
||||
#include "time.h"
|
||||
|
||||
#include <string.h>
|
||||
|
||||
|
||||
uint8_t trade_serial[2][TRADE_SERIAL_LENGTH] = {0};
|
||||
static FEE_MODEL current_setting_fee_model = {0};
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t phy_num;
|
||||
uint32_t logic_num;
|
||||
} CARD_NUM;
|
||||
|
||||
static CARD_NUM card_num[2] = {0};
|
||||
|
||||
void set_card_phy_logic_num(uint8_t idx, uint8_t type, uint32_t num)
|
||||
{
|
||||
idx = idx - 1;
|
||||
if (idx >= 2)
|
||||
{
|
||||
return;
|
||||
}
|
||||
if (type == 0)
|
||||
{
|
||||
card_num[idx].phy_num = num;
|
||||
}
|
||||
else if (type == 1)
|
||||
{
|
||||
card_num[idx].logic_num = num;
|
||||
}
|
||||
}
|
||||
|
||||
uint32_t get_card_phy_num(uint8_t idx)
|
||||
{
|
||||
idx = idx - 1;
|
||||
if (idx >= 2)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return card_num[idx].phy_num;
|
||||
}
|
||||
|
||||
uint32_t get_card_logic_num(uint8_t idx)
|
||||
{
|
||||
if (idx >= 2)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return card_num[idx].logic_num;
|
||||
}
|
||||
|
||||
void load_charger_serial(uint8_t stake_mark, uint8_t *serial)
|
||||
{
|
||||
// memcpy(serial, charger_serial[stake_mark - 1], CHARGER_SERIAL_LENGTH);
|
||||
memcpy(serial, g_charger_manager.charger_piles[stake_mark - 1].login_info.charger_serial, CHARGER_SERIAL_LENGTH);
|
||||
}
|
||||
|
||||
// void set_charger_serial_for_server(uint8_t value, uint8_t offset)
|
||||
// {
|
||||
// uint8_t hi = 0;
|
||||
// uint8_t lo = 0;
|
||||
// if (offset >= CHARGER_SERIAL_LENGTH)
|
||||
// {
|
||||
// return;
|
||||
// }
|
||||
// hi = value / 10;
|
||||
// lo = value % 10;
|
||||
// charger_serial[offset] = hi * 16 + lo;
|
||||
// }
|
||||
|
||||
void set_trade_serial(uint8_t stake_mark,uint8_t idx, uint8_t *serial)
|
||||
{
|
||||
idx = idx - 1;
|
||||
if (idx < 2)
|
||||
{
|
||||
memcpy(g_charger_manager.charger_piles[stake_mark - 1].guns[idx].real_time_data.trade_serial, serial, TRADE_SERIAL_LENGTH);
|
||||
}
|
||||
}
|
||||
|
||||
void load_trade_serial(uint8_t stake_mark,uint8_t idx, uint8_t *serial)
|
||||
{
|
||||
idx = idx - 1;
|
||||
if (idx < 2)
|
||||
{
|
||||
memcpy(serial, g_charger_manager.charger_piles[stake_mark - 1].guns[idx].real_time_data.trade_serial, TRADE_SERIAL_LENGTH);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
uint8_t is_my_charger_serial(uint8_t stake_mark, uint8_t *serial)
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
|
||||
if (!memcmp(&g_charger_manager.charger_piles[stake_mark-1].login_info.charger_serial, serial, CHARGER_SERIAL_LENGTH))
|
||||
{
|
||||
ret = 1;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
// CRC 计算
|
||||
const uint8_t gabyCRCHi[] =
|
||||
{
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1,
|
||||
0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1,
|
||||
0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1,
|
||||
0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40,
|
||||
0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1,
|
||||
0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41,
|
||||
0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0,
|
||||
0x80, 0x41, 0x00, 0xc1, 0x81, 0x40};
|
||||
|
||||
const uint16_t gabyCRCLo[] =
|
||||
{
|
||||
0x00, 0xc0, 0xc1, 0x01, 0xc3, 0x03, 0x02, 0xc2, 0xc6, 0x06,
|
||||
0x07, 0xc7, 0x05, 0xc5, 0xc4, 0x04, 0xcc, 0x0c, 0x0d, 0xcd,
|
||||
0x0f, 0xcf, 0xce, 0x0e, 0x0a, 0xca, 0xcb, 0x0b, 0xc9, 0x09,
|
||||
0x08, 0xc8, 0xd8, 0x18, 0x19, 0xd9, 0x1b, 0xdb, 0xda, 0x1a,
|
||||
0x1e, 0xde, 0xdf, 0x1f, 0xdd, 0x1d, 0x1c, 0xdc, 0x14, 0xd4,
|
||||
0xd5, 0x15, 0xd7, 0x17, 0x16, 0xd6, 0xd2, 0x12, 0x13, 0xd3,
|
||||
0x11, 0xd1, 0xd0, 0x10, 0xf0, 0x30, 0x31, 0xf1, 0x33, 0xf3,
|
||||
0xf2, 0x32, 0x36, 0xf6, 0xf7, 0x37, 0xf5, 0x35, 0x34, 0xf4,
|
||||
0x3c, 0xfc, 0xfd, 0x3d, 0xff, 0x3f, 0x3e, 0xfe, 0xfa, 0x3a,
|
||||
0x3b, 0xfb, 0x39, 0xf9, 0xf8, 0x38, 0x28, 0xe8, 0xe9, 0x29,
|
||||
0xeb, 0x2b, 0x2a, 0xea, 0xee, 0x2e, 0x2f, 0xef, 0x2d, 0xed,
|
||||
0xec, 0x2c, 0xe4, 0x24, 0x25, 0xe5, 0x27, 0xe7, 0xe6, 0x26,
|
||||
0x22, 0xe2, 0xe3, 0x23, 0xe1, 0x21, 0x20, 0xe0, 0xa0, 0x60,
|
||||
0x61, 0xa1, 0x63, 0xa3, 0xa2, 0x62, 0x66, 0xa6, 0xa7, 0x67,
|
||||
0xa5, 0x65, 0x64, 0xa4, 0x6c, 0xac, 0xad, 0x6d, 0xaf, 0x6f,
|
||||
0x6e, 0xae, 0xaa, 0x6a, 0x6b, 0xab, 0x69, 0xa9, 0xa8, 0x68,
|
||||
0x78, 0xb8, 0xb9, 0x79, 0xbb, 0x7b, 0x7a, 0xba, 0xbe, 0x7e,
|
||||
0x7f, 0xbf, 0x7d, 0xbd, 0xbc, 0x7c, 0xb4, 0x74, 0x75, 0xb5,
|
||||
0x77, 0xb7, 0xb6, 0x76, 0x72, 0xb2, 0xb3, 0x73, 0xb1, 0x71,
|
||||
0x70, 0xb0, 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92,
|
||||
0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9c, 0x5c,
|
||||
0x5d, 0x9d, 0x5f, 0x9f, 0x9e, 0x5e, 0x5a, 0x9a, 0x9b, 0x5b,
|
||||
0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, 0x4b, 0x8b,
|
||||
0x8a, 0x4a, 0x4e, 0x8e, 0x8f, 0x4f, 0x8d, 0x4d, 0x4c, 0x8c,
|
||||
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42,
|
||||
0x43, 0x83, 0x41, 0x81, 0x80, 0x40};
|
||||
|
||||
uint16_t calc_crc16(uint8_t *pData, uint8_t len)
|
||||
{
|
||||
uint8_t byCRCHi = 0xff;
|
||||
uint8_t byCRCLo = 0xff;
|
||||
uint8_t byIdx;
|
||||
uint16_t crc;
|
||||
while (len--)
|
||||
{
|
||||
byIdx = byCRCHi ^ *pData++;
|
||||
byCRCHi = byCRCLo ^ gabyCRCHi[byIdx];
|
||||
byCRCLo = gabyCRCLo[byIdx];
|
||||
}
|
||||
crc = byCRCHi;
|
||||
crc <<= 8;
|
||||
crc += byCRCLo;
|
||||
return crc;
|
||||
}
|
||||
|
||||
uint8_t unpack_server_data(uint8_t *buf, uint8_t len, SERVER_PACK *pack)
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
uint16_t calc_crc = 0;
|
||||
|
||||
if (!buf || len < SERVER_PACK_MIN_LEN)
|
||||
{
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (buf[0] == SERVER_PACK_START_FLAG)
|
||||
{
|
||||
pack->start_flag = buf[0];
|
||||
pack->len = buf[1];
|
||||
pack->serial = buf[2] + (buf[3] << 8);
|
||||
pack->encrypt_flag = buf[4];
|
||||
pack->frame_type = buf[5];
|
||||
if (pack->len > 4)
|
||||
{
|
||||
pack->data = &buf[6];
|
||||
memcpy(pack->data, &buf[6], pack->len - 4);
|
||||
}
|
||||
pack->crc = (buf[len - 2] << 8) + buf[len - 1];
|
||||
calc_crc = calc_crc16(&buf[2], pack->len);
|
||||
if (pack->crc == calc_crc)
|
||||
{
|
||||
ret = 1;
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
void pack_and_send_server_data(uint8_t type, uint8_t *pdata, uint8_t len, uint8_t stake_mark)
|
||||
{
|
||||
uint8_t index = 0;
|
||||
uint16_t crc = 0;
|
||||
uint16_t current_serial = 0;
|
||||
uint8_t *buf = NULL;
|
||||
buf = (uint8_t *)pvPortMalloc(len + 14);
|
||||
if (!buf)
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
/* 原子获取全局包序号，避免多任务竞争 */
|
||||
// taskENTER_CRITICAL();
|
||||
current_serial = pack_serial;
|
||||
pack_serial++;
|
||||
// taskEXIT_CRITICAL();
|
||||
|
||||
buf[index++] = 0x55;
|
||||
buf[index++] = 0xAA;
|
||||
buf[index++] = 0x01;
|
||||
buf[index++] = stake_mark;
|
||||
|
||||
buf[index++] = SERVER_PACK_START_FLAG;
|
||||
buf[index++] = len + 4;
|
||||
buf[index++] = (current_serial >> 8) & 0xFF;
|
||||
buf[index++] = current_serial & 0xFF;
|
||||
|
||||
buf[index++] = 0x00;
|
||||
buf[index++] = type;
|
||||
if ((len > 0) && (pdata))
|
||||
{
|
||||
memcpy(&buf[index], pdata, len);
|
||||
}
|
||||
index = index + len;
|
||||
crc = calc_crc16(&buf[6], len + 4);
|
||||
buf[index++] = crc & 0xFF;
|
||||
buf[index++] = (crc >> 8) & 0xFF;
|
||||
buf[index++] = 0xAA;
|
||||
buf[index++] = 0x55;
|
||||
Air724_Message_Send(buf, index);
|
||||
vPortFree(buf);
|
||||
}
|
||||
int get_num_from_string(const char *str, int *num)
|
||||
{
|
||||
int len = strlen(str);
|
||||
int index = 0;
|
||||
int t = 0;
|
||||
int flag = 0;
|
||||
int i;
|
||||
for (i = 0; i < len; i++)
|
||||
{
|
||||
flag = 0;
|
||||
while ((str[i] >= '0' && str[i] <= '9') && (i < len))
|
||||
{
|
||||
t = str[i] - '0';
|
||||
num[index] = num[index] * 10 + t;
|
||||
i++;
|
||||
flag = 1;
|
||||
}
|
||||
if (flag)
|
||||
{
|
||||
index++;
|
||||
}
|
||||
}
|
||||
return index;
|
||||
}
|
||||
|
||||
void get_cp56time_from_sec(uint8_t *buff, uint32_t sec)
|
||||
{
|
||||
struct tm timeinfo;
|
||||
st_cp56time2a cp56time = {0};
|
||||
time_t rawtime = sec;
|
||||
localtime_r(&rawtime, &timeinfo);
|
||||
cp56time.Compts.year = timeinfo.tm_year % 100; // 获取年份的最后两位数
|
||||
cp56time.Compts.month = timeinfo.tm_mon + 1; // tm_mon是从0开始的，所以需要加1
|
||||
cp56time.Compts.mday = timeinfo.tm_mday;
|
||||
cp56time.Compts.hour = timeinfo.tm_hour;
|
||||
cp56time.Compts.min = timeinfo.tm_min;
|
||||
cp56time.Compts.msec = timeinfo.tm_sec * 1000;
|
||||
buff[0] = cp56time.time & 0xFF;
|
||||
buff[1] = (cp56time.time >> 8) & 0xFF;
|
||||
buff[2] = (cp56time.time >> 16) & 0xFF;
|
||||
buff[3] = (cp56time.time >> 24) & 0xFF;
|
||||
buff[4] = (cp56time.time >> 32) & 0xFF;
|
||||
buff[5] = (cp56time.time >> 40) & 0xFF;
|
||||
buff[6] = (cp56time.time >> 48) & 0xFF;
|
||||
}
|
||||
|
||||
void update_current_fee_model(FEE_MODEL *model)
|
||||
{
|
||||
if (!model)
|
||||
{
|
||||
return;
|
||||
}
|
||||
memcpy(¤t_setting_fee_model, model, sizeof(FEE_MODEL));
|
||||
}
|
||||
|
||||
FEE_MODEL *get_setting_fee_model(void)
|
||||
{
|
||||
return ¤t_setting_fee_model;
|
||||
}
|
||||
|
||||
uint16_t htons(uint16_t val)
|
||||
{
|
||||
return (val << 8) | (val >> 8);
|
||||
}
|
||||
|
||||
#endif
|
||||
475
Core/Middlewares/Third_Party/Ykc/server_common.h
vendored
475
Core/Middlewares/Third_Party/Ykc/server_common.h
vendored
@@ -1,475 +0,0 @@
|
||||
#ifndef __SERVER_COMMON_H__
|
||||
#define __SERVER_COMMON_H__
|
||||
#include <stdint.h>
|
||||
|
||||
#define SERVER_PACK_MAX_LEN 255
|
||||
#define SERVER_PACK_MIN_LEN 8
|
||||
#define SERVER_PACK_START_FLAG 0x68
|
||||
|
||||
#define CHARGER_SERIAL_LENGTH 7
|
||||
#define TRADE_SERIAL_LENGTH 16
|
||||
|
||||
#define RSA_LENGTH 88
|
||||
|
||||
#define CHARGER_TYPE_DC 0
|
||||
#define CHARGER_TYPE_AC 1
|
||||
|
||||
#define HEADER_LENGTH 6 // 消息体前的头部数据长度
|
||||
|
||||
#define FRAME_TYPE_0X01 0x01 // 充电桩登录认证
|
||||
#define FRAME_TYPE_0X02 0x02
|
||||
#define FRAME_TYPE_0X03 0x03 // 充电桩心跳包
|
||||
#define FRAME_TYPE_0X04 0x04
|
||||
#define FRAME_TYPE_0X05 0x05 // 计费模型验证请求
|
||||
#define FRAME_TYPE_0X06 0x06
|
||||
#define FRAME_TYPE_0X09 0x09 // 充电桩计费模型请求
|
||||
#define FRAME_TYPE_0X0A 0x0A
|
||||
|
||||
#define FRAME_TYPE_0X12 0x12 // 读取实时监测数据
|
||||
// charger ---> server
|
||||
#define FRAME_TYPE_0X13 0x13 // 离线监测数据
|
||||
#define FRAME_TYPE_0X15 0x15 // 充电握手
|
||||
#define FRAME_TYPE_0X17 0x17 // 参数配置
|
||||
#define FRAME_TYPE_0X19 0x19 // 充电结束
|
||||
#define FRAME_TYPE_0X1B 0x1B // 错误报文
|
||||
#define FRAME_TYPE_0X1D 0x1D // 充电阶段BMS中止
|
||||
#define FRAME_TYPE_0X21 0x21 // 充电阶段充电机中止
|
||||
#define FRAME_TYPE_0X23 0x23 // 充电过程BMS需求、充电机输出
|
||||
#define FRAME_TYPE_0X25 0x25 // 充电过程BMS信息
|
||||
|
||||
//---------------------------------------
|
||||
#define FRAME_TYPE_0X31 0x31 // 充电桩主动申请启动充电
|
||||
#define FRAME_TYPE_0X32 0x32 // 运营平台确认启动充电
|
||||
#define FRAME_TYPE_0X33 0x33 // 远程启动命令回复
|
||||
#define FRAME_TYPE_0X34 0x34 // 运营平台远程控制启动
|
||||
|
||||
#define FRAME_TYPE_0X35 0x35 // 远程停机命令回复
|
||||
#define FRAME_TYPE_0X36 0x36 // 运营平台远程停机
|
||||
//---------------------------------------
|
||||
|
||||
#define FRAME_TYPE_0X3B 0x3B // 交易记录
|
||||
#define FRAME_TYPE_0X40 0x40 // 交易记录确认
|
||||
#define FRAME_TYPE_0X41 0x41 // 交易更新应答
|
||||
#define FRAME_TYPE_0X42 0x42 // 远程账户余额更新
|
||||
#define FRAME_TYPE_0X43 0x43 // 卡数据同步
|
||||
#define FRAME_TYPE_0X44 0x44 // 离线卡数据同步
|
||||
#define FRAME_TYPE_0X45 0x45 // 离线卡数据清除
|
||||
#define FRAME_TYPE_0X46 0x46 // 离线卡数据清除应答
|
||||
#define FRAME_TYPE_0X47 0x47 // 离线卡数据清除
|
||||
#define FRAME_TYPE_0X48 0x48 // 离线卡数据清除应答
|
||||
|
||||
#define FRAME_TYPE_0X51 0x51 // 充电桩工作参数设置应答
|
||||
#define FRAME_TYPE_0X52 0x52 // 充电桩工作参数设置
|
||||
|
||||
#define FRAME_TYPE_0X55 0x55 // 对时设置应答
|
||||
#define FRAME_TYPE_0X56 0x56 // 对时设置
|
||||
|
||||
#define FRAME_TYPE_0X57 0x57 // 计费模型应答
|
||||
#define FRAME_TYPE_0X58 0x58 // 计算模型设置
|
||||
|
||||
#define FRAME_TYPE_0X61 0x61 // 地锁数据上送
|
||||
#define FRAME_TYPE_0X62 0x62 // 遥控地锁升锁与降锁
|
||||
#define FRAME_TYPE_0X63 0x63 // 充电桩返回数据
|
||||
|
||||
#define FRAME_TYPE_0X91 0x91 // 远程启动应答
|
||||
#define FRAME_TYPE_0X92 0x92 // 远程启动
|
||||
#define FRAME_TYPE_0X93 0x93 // 远程更新应答
|
||||
#define FRAME_TYPE_0X94 0x94 // 远程更新
|
||||
|
||||
#define FRAME_TYPE_0XA1 0xA1 // 充电桩主动申请并充充电
|
||||
#define FRAME_TYPE_0XA2 0xA2 // 运营平台确认并充启动充电
|
||||
|
||||
#define FRAME_TYPE_0XA3 0xA3 // 远程并充启机命令回复
|
||||
#define FRAME_TYPE_0XA4 0xA4 // 运营平台远程控制并充启机
|
||||
#define FRAME_TYPE_0XA7 0xA7
|
||||
#define FRAME_TYPE_0X91 0x91
|
||||
#define FRAME_TYPE_0X92 0x92
|
||||
#define FRAME_TYPE_MAX 0xFF
|
||||
|
||||
#define CAHRGE_START_MODE_APP 0x01
|
||||
#define CAHRGE_START_MODE_CARD 0x02
|
||||
#define CAHRGE_START_MODE_OFFLINE_CARD 0x04
|
||||
#define CAHRGE_START_MODE_VIN 0x05
|
||||
|
||||
#define CAHRGE_START_MODE_IC_CARD 0xA0
|
||||
#define CAHRGE_START_MODE_PASSWORD 0xA1
|
||||
|
||||
#define STOP_CHARGE_AS_APP 0x40
|
||||
#define STOP_CHARGE_AS_FULL 0x41
|
||||
#define STOP_CHARGE_AS_ENERGY_REACH 0x42
|
||||
#define STOP_CHARGE_AS_MONEY_REACH 0x43
|
||||
#define STOP_CHARGE_AS_TIME_REACH 0x44
|
||||
#define STOP_CHARGE_AS_MANUAL 0x45
|
||||
#define STOP_CHARGE_AS_NO_MONEY 0x6E
|
||||
|
||||
#define STOP_CHARGE_AS_EMERGY_STOP 0x72
|
||||
#define STOP_CHARGE_AS_POWEROFF 0x83
|
||||
|
||||
typedef enum
|
||||
{
|
||||
STOP_REASON_APP = 0x40,
|
||||
STOP_REASON_FULL = 0x41,
|
||||
STOP_REASON_MANUAL = 0x45,
|
||||
STOP_REASON_INSUFFICIENT_BALANCE = 0x6E,
|
||||
STOP_REASON_EMERGENCY_STOP = 0x72,
|
||||
STOP_REASON_OTHER // 其他原因可以添加在这里
|
||||
} StopReason;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t start_flag;
|
||||
uint8_t len;
|
||||
uint16_t serial;
|
||||
uint8_t encrypt_flag;
|
||||
uint8_t frame_type;
|
||||
uint8_t *data;
|
||||
uint16_t crc;
|
||||
} SERVER_PACK;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
float voltage; // 电压 (单位: V)
|
||||
float charge_energy; // 充电能量 (单位: kWh)
|
||||
float current; // 电流 (单位: A)
|
||||
unsigned long charge_time; // 充电时间 (单位: 秒)
|
||||
float charge_money; // 充电费用 (单位: 元)
|
||||
} CHARGING_GUN_CTRL;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint16_t fee_model_no; // 计费模型编号
|
||||
uint32_t shark_fee_ratio; // 尖费电费费率
|
||||
uint32_t shark_service_ratio; // 尖服务费费率
|
||||
uint32_t peak_fee_ratio; // 峰电费费率
|
||||
uint32_t peak_service_ratio; // 峰服务费费率
|
||||
uint32_t flat_fee_ratio; // 平电费费率
|
||||
uint32_t flat_service_ratio; // 平服务费费率
|
||||
uint32_t valley_fee_ratio; // 谷电费费率
|
||||
uint32_t valley_service_ratio; // 谷服务费费率
|
||||
uint8_t loss_ratio; // 计损比例
|
||||
uint8_t fee_num[48]; // 0x00：尖费率 0x01：峰费率 0x02：平费率 0x03：谷费率
|
||||
} __attribute__((packed)) FEE_MODEL;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t charger_type; // 桩类型,0--DC,1--AC
|
||||
uint8_t gun_num; // 充电枪个数
|
||||
uint8_t protocol_ver; // 协议版本
|
||||
uint8_t software_ver[8]; // 程序版本
|
||||
uint8_t net_conn_type; // 网络链接类型,0：SIM卡,1:LAN,2：WAN,03:others
|
||||
uint8_t sim[10]; // SIM卡
|
||||
uint8_t tele_factory; // 0x00,移动,02:电信,03:联通,04:其他
|
||||
} __attribute__((packed)) PACK_DATA_0X01; // 0x01 充电桩登陆认证
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t result; // 登陆结果
|
||||
} __attribute__((packed)) PACK_DATA_0X02; // 0x02 充电桩登陆认证应答;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t gun_index; // 枪号
|
||||
uint8_t gun_status; // 枪状态,0:正常,1:异常
|
||||
} __attribute__((packed)) PACK_DATA_0X03; // 0x03
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t gun_index; // 枪号
|
||||
uint8_t ack; // 0
|
||||
} __attribute__((packed)) PACK_DATA_0X04; // 0x04
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint16_t fee_model_no; // 计费模型编号
|
||||
} __attribute__((packed)) PACK_DATA_0X05; // 05 计费模型验证请求
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint16_t fee_model_no; // 计费模型编号
|
||||
uint8_t result; // 0x00 桩计费模型与平台一致,0x01 桩计费模型与平台不一致
|
||||
} __attribute__((packed)) PACK_DATA_0X06; // 06 计费模型验证请求
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
} __attribute__((packed)) PACK_DATA_0X09; // 0x09 计费模型请求
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
FEE_MODEL model;
|
||||
} __attribute__((packed)) PACK_DATA_0X0A; // 0x0A
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t status; // 状态
|
||||
uint8_t gun_back; // 枪是否归位
|
||||
uint8_t gun_is_insert; // 是否插枪
|
||||
uint16_t out_voltage; // 输出电压,小数点后一位,待机置0
|
||||
uint16_t out_current; // 输出电流,小数点后一位,待机置0
|
||||
uint8_t gun_line_temp; // 枪线温度
|
||||
uint8_t gun_line_num[8]; // 枪线编码
|
||||
uint8_t soc; // 待机置零；交流桩置零
|
||||
uint8_t battery_temp; // 电池组最高温度.整形，偏移量-50 oC；待机置零；交流桩置零
|
||||
uint16_t charge_time; // 累计充电时间
|
||||
uint16_t remain_time; // 剩余时间
|
||||
uint32_t charge_energy; // 充电度数
|
||||
uint32_t loss_energy; // 计损充电度数
|
||||
uint32_t charge_money; // 已充金额
|
||||
uint16_t hard_fault; // 硬件故障
|
||||
} __attribute__((packed)) PACK_DATA_0X13; // 0x13
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t bms_soc; //
|
||||
uint16_t bms_vol_low; //
|
||||
uint16_t bms_vol_high;
|
||||
uint8_t bms_temp_low; //
|
||||
uint8_t bms_temp_high;
|
||||
uint16_t charge_time; // 电桩累计充电时间
|
||||
uint16_t out_energy; // 电桩输出能量
|
||||
uint32_t charger_motor_no; // 充电桩电机编号
|
||||
} __attribute__((packed)) PACK_DATA_0X19; // 0x19
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t start_mode; // 启动方式,0x1刷卡启动,0x02,账号启动,0x03，VIN码启动
|
||||
uint8_t password_flag; // 是否需要密码
|
||||
uint8_t card_no[8]; // 账号或物理卡号
|
||||
uint8_t password[16]; // 对用户输入的密码进行16位MD5加密,小写上传
|
||||
uint8_t vin[17]; // VIN码,非VIN码方式为0
|
||||
} __attribute__((packed)) PACK_DATA_0X31; // 0x31
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t logic_card_no[8]; // 逻辑卡号
|
||||
uint32_t remain_money; // 账户余额
|
||||
uint8_t result; // 鉴权成功标志,0失败,1成功
|
||||
uint8_t err_code; // 失败原因,0x01账户不存在,0x02账户冻结,0x03余额不足,0x04未结账记录,0x05桩停用
|
||||
// 0x06账户不能在此桩充电,0x07密码错误,0x08电站电容不足,0x09VIN码不存在,
|
||||
// 0x0A该桩存在未结账记录,0x0B该桩不支持刷卡
|
||||
} __attribute__((packed)) PACK_DATA_0X32; // 0x32
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t result; // 启动结果
|
||||
uint8_t err_code; // 失败原因
|
||||
} __attribute__((packed)) PACK_DATA_0X33; // 0x33
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t logic_cardid[8]; // 逻辑卡号
|
||||
uint8_t phy_cardid[8]; // 物理卡号
|
||||
uint32_t remain_money; // 账户余额,0.01元
|
||||
uint16_t max_power; // 最大功率
|
||||
} __attribute__((packed)) PACK_DATA_0X34; // 0x34
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t result; // 停止结果,0x00失败 0x01成功
|
||||
uint8_t err_code; // 失败原因,0x0无
|
||||
} __attribute__((packed)) PACK_DATA_0X35; // 0x35
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
} __attribute__((packed)) PACK_DATA_0X36; // 0x36
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t start_time[7]; // 开始时间
|
||||
uint8_t end_time[7]; // 结束时间
|
||||
|
||||
uint8_t meter_id[6];
|
||||
uint8_t meter_ciphertext[34];
|
||||
uint8_t meter_protocol_version[2];
|
||||
uint8_t encryption_type;
|
||||
uint32_t shark_price; // 尖单价
|
||||
uint32_t shark_energy; // 尖电量
|
||||
uint32_t loss_shark_energy; // 计损尖电量
|
||||
uint32_t shark_money; // 尖金额
|
||||
|
||||
uint32_t peak_price; // 峰单价
|
||||
uint32_t peak_energy; // 峰电量
|
||||
uint32_t loss_peak_energy; // 计损峰电量
|
||||
uint32_t peak_money; // 峰金额
|
||||
|
||||
uint32_t flat_price; // 平单价
|
||||
uint32_t flat_energy; // 平电量
|
||||
uint32_t loss_flat_energy; // 计损平电量
|
||||
uint32_t flat_money; // 平金额
|
||||
|
||||
uint32_t valley_price; // 谷单价
|
||||
uint32_t valley_energy; // 谷电量
|
||||
uint32_t loss_valley_energy; // 计损谷电量
|
||||
uint32_t valley_money; // 谷金额
|
||||
|
||||
uint8_t meter_start_value[5];
|
||||
uint8_t meter_end_value[5];
|
||||
uint32_t total_energy; // 总电量
|
||||
uint32_t loss_total_energy; // 计损总电量
|
||||
uint32_t consumption; // 消费金额
|
||||
uint8_t vin[17]; // 电动汽车唯一标识
|
||||
uint8_t trade_flag; // 交易标识
|
||||
uint8_t trade_data[7]; // 交易日期
|
||||
uint8_t stop_reason; // 停止原因
|
||||
uint8_t phy_cardid[8]; // 物理卡号
|
||||
} __attribute__((packed)) PACK_DATA_0X3B; // 0x3B
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t logical_card_number[8]; // 逻辑卡号
|
||||
uint8_t physical_card_number[8]; // 物理卡号
|
||||
uint8_t balance[4]; // 账户余额
|
||||
uint8_t max_power[2]; // 最大功率
|
||||
} __attribute__((packed)) PACK_DATA_0XA8;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t result[1];
|
||||
uint8_t reson[1];
|
||||
} __attribute__((packed)) PACK_DATA_0XA7;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t trade_serial[TRADE_SERIAL_LENGTH]; // 交易流水号
|
||||
uint8_t result;
|
||||
} __attribute__((packed)) PACK_DATA_0X40;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t phy_cardid[8]; // 物理卡号
|
||||
uint8_t result; // 0:修改成功,1:设备编码错误,2:卡号错误
|
||||
} __attribute__((packed)) PACK_DATA_0X41;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t gun_index; // 枪编号
|
||||
uint8_t phy_cardid[8]; // 物理卡号
|
||||
uint8_t remain_money[4]; // 修复后的余额
|
||||
} __attribute__((packed)) PACK_DATA_0X42;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t current_time[7];
|
||||
} __attribute__((packed)) PACK_DATA_0X55;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编号
|
||||
uint8_t current_time[7];
|
||||
} __attribute__((packed)) PACK_DATA_0X56;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t result; // 设置结果
|
||||
} __attribute__((packed)) PACK_DATA_0X57; // 0x57
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
FEE_MODEL model;
|
||||
} __attribute__((packed)) PACK_DATA_0X58; // 0x58
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t control_mode;
|
||||
} __attribute__((packed)) PACK_DATA_0X92; // 0x92
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint8_t charger_serial[CHARGER_SERIAL_LENGTH]; // 桩编码
|
||||
uint8_t result;
|
||||
} __attribute__((packed)) PACK_DATA_0X91; // 0x91
|
||||
#pragma pack(1)
|
||||
typedef volatile union
|
||||
{
|
||||
uint64_t time; // 低7字节是七个八位位组二进制时间
|
||||
struct
|
||||
{
|
||||
uint16_t msec;
|
||||
uint8_t min : 6;
|
||||
uint8_t res1 : 1;
|
||||
uint8_t iv : 1;
|
||||
uint8_t hour : 5;
|
||||
uint8_t res2 : 2;
|
||||
uint8_t su : 1;
|
||||
uint8_t mday : 5;
|
||||
uint8_t wday : 3;
|
||||
uint8_t month : 4;
|
||||
uint8_t res3 : 4;
|
||||
uint8_t year : 7;
|
||||
uint8_t res4 : 1;
|
||||
} Compts;
|
||||
} st_cp56time2a;
|
||||
|
||||
#pragma pack()
|
||||
|
||||
struct QueueItem
|
||||
{
|
||||
uint8_t *data;
|
||||
uint16_t length;
|
||||
};
|
||||
|
||||
extern void load_charger_serial(uint8_t stake_mark, uint8_t *serial);
|
||||
extern void set_charger_serial_for_server(uint8_t value, uint8_t offset);
|
||||
extern uint8_t is_my_charger_serial(uint8_t stake_mark, uint8_t *serial);
|
||||
extern void load_trade_serial(uint8_t stake_mark, uint8_t idx, uint8_t *serial);
|
||||
extern void set_trade_serial(uint8_t stake_mark, uint8_t idx, uint8_t *serial);
|
||||
extern void increase_heart_beat_cnt(void);
|
||||
extern void reset_heart_beat_cnt(void);
|
||||
extern uint32_t get_heart_beat_cnt(void);
|
||||
extern uint8_t unpack_server_data(uint8_t *buf, uint8_t len, SERVER_PACK *pack);
|
||||
extern void pack_and_send_server_data(uint8_t type, uint8_t *data, uint8_t len, uint8_t stake_mark);
|
||||
extern int get_num_from_string(const char *str, int *num);
|
||||
extern uint32_t get_card_logic_num(uint8_t idx);
|
||||
extern uint32_t get_card_phy_num(uint8_t idx);
|
||||
extern void set_card_phy_logic_num(uint8_t idx, uint8_t type, uint32_t num);
|
||||
extern void get_cp56time_from_sec(uint8_t *buff, uint32_t sec);
|
||||
extern void update_current_fee_model(FEE_MODEL *model);
|
||||
extern FEE_MODEL *get_setting_fee_model(void);
|
||||
extern void generateTransactionID(uint8_t *buffer, uint16_t bufferSize, uint8_t gun_num);
|
||||
extern void printLocalTime();
|
||||
extern void sendFailureReasonToQueue(StopReason reason);
|
||||
uint16_t htons(uint16_t val);
|
||||
#endif
|
||||
271
Core/Middlewares/Third_Party/Ykc/server_to_charger.c
vendored
271
Core/Middlewares/Third_Party/Ykc/server_to_charger.c
vendored
@@ -1,271 +0,0 @@
|
||||
#include "global.h"
|
||||
#include "server_to_charger.h"
|
||||
|
||||
// 登录认证应答
|
||||
void on_cmd_frame_type_0X02(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X02 data;
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X02));
|
||||
if (is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
if (data.result == 0)
|
||||
{
|
||||
g_charger_manager.charger_piles[stake_index - 1].is_online = 1;
|
||||
#ifdef DEBUG
|
||||
printf("北向：桩ID %d 登陆成功!\r\n", stake_index);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// 心跳应答
|
||||
void on_cmd_frame_type_0X04(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X04 data;
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X04));
|
||||
#ifdef DEBUG
|
||||
printf("北向：桩ID %d 收到心跳应答!\r\n", stake_index);
|
||||
#endif
|
||||
}
|
||||
|
||||
// 计费模型验证应答
|
||||
void on_cmd_frame_type_0X06(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X06 data;
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X06));
|
||||
if (is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
#ifdef DEBUG
|
||||
printf("北向：接收到计费模型验证应答，模型ID：%d, 验证结果：%d\r\n", data.fee_model_no, data.result);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
// 获取计费模型
|
||||
void on_cmd_frame_type_0X0A(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X0A data;
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X0A));
|
||||
|
||||
if (is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
g_charger_manager.fee_model_global = data.model;
|
||||
g_charger_manager.charger_piles[stake_index - 1].get_model = true;
|
||||
|
||||
#ifdef DEBUG
|
||||
|
||||
printf("北向：接收到计费模型应答,模型ID:%d\r\n", g_charger_manager.fee_model_global.fee_model_no);
|
||||
printf("尖电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.shark_fee_ratio, g_charger_manager.fee_model_global.shark_service_ratio);
|
||||
printf("峰电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.peak_fee_ratio, g_charger_manager.fee_model_global.peak_service_ratio);
|
||||
printf("平电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.flat_fee_ratio, g_charger_manager.fee_model_global.flat_service_ratio);
|
||||
printf("谷电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.valley_fee_ratio, g_charger_manager.fee_model_global.valley_service_ratio);
|
||||
printf("计损比例: %d%% \r\n", g_charger_manager.fee_model_global.loss_ratio);
|
||||
|
||||
printf("\n合并后的费率时间段 :\r\n");
|
||||
printf("================================================================\r\n");
|
||||
|
||||
int i = 0;
|
||||
|
||||
while (i < 48)
|
||||
{
|
||||
uint8_t current_type = g_charger_manager.fee_model_global.fee_num[i];
|
||||
const char *fee_name;
|
||||
|
||||
switch (current_type)
|
||||
{
|
||||
case 0x00:
|
||||
fee_name = " 尖时 ";
|
||||
break;
|
||||
case 0x01:
|
||||
fee_name = " 峰时 ";
|
||||
break;
|
||||
case 0x02:
|
||||
fee_name = " 平时 ";
|
||||
break;
|
||||
case 0x03:
|
||||
fee_name = " 谷时 ";
|
||||
break;
|
||||
default:
|
||||
fee_name = " 未知 ";
|
||||
break;
|
||||
}
|
||||
|
||||
// 起始时间（第 i 个半小时段）
|
||||
int start_hour = i / 2;
|
||||
int start_min = (i % 2) * 30;
|
||||
|
||||
// 向后查找连续相同费率的结束位置
|
||||
int j = i;
|
||||
while (j < 48 && g_charger_manager.fee_model_global.fee_num[j] == current_type)
|
||||
{
|
||||
j++;
|
||||
}
|
||||
// j 是第一个不等于 current_type 的位置，所以结束段是 j-1
|
||||
int end_idx = j - 1;
|
||||
int end_hour = (end_idx + 1) / 2; // 结束时间是 (end_idx+1) 对应的半小时起点
|
||||
int end_min = ((end_idx + 1) % 2) * 30;
|
||||
|
||||
// 处理跨天：24:00 显示为 00:00
|
||||
if (end_hour == 24)
|
||||
{
|
||||
end_hour = 0;
|
||||
}
|
||||
|
||||
printf("%02d:%02d-%02d:%02d 为 %s 费率\r\n",
|
||||
start_hour, start_min,
|
||||
end_hour, end_min,
|
||||
fee_name);
|
||||
|
||||
i = j; // 跳到下一个不同费率段
|
||||
}
|
||||
printf("================================================================\r\n");
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
void on_cmd_frame_type_0X58(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X58 data;
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X58));
|
||||
|
||||
if (is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
|
||||
g_charger_manager.fee_model_global = data.model;
|
||||
|
||||
#ifdef DEBUG
|
||||
char str[150];
|
||||
Rs485_Message_Send("t0.txt=\"\"\xff\xff\xff", 12);
|
||||
printf("北向：接收到计费模型应答,模型ID:%d\r\n", g_charger_manager.fee_model_global.fee_model_no);
|
||||
printf("尖电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.shark_fee_ratio, g_charger_manager.fee_model_global.shark_service_ratio);
|
||||
printf("峰电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.peak_fee_ratio, g_charger_manager.fee_model_global.peak_service_ratio);
|
||||
printf("平电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.flat_fee_ratio, g_charger_manager.fee_model_global.flat_service_ratio);
|
||||
printf("谷电费率:%d 服务费:%d\r\n", g_charger_manager.fee_model_global.valley_fee_ratio, g_charger_manager.fee_model_global.valley_service_ratio);
|
||||
printf("计损比例: %d%% \r\n", g_charger_manager.fee_model_global.loss_ratio);
|
||||
printf("\n合并后的费率时间段:\r\n");
|
||||
printf("================================================================\r\n");
|
||||
|
||||
int i = 0;
|
||||
|
||||
while (i < 48)
|
||||
{
|
||||
uint8_t current_type = g_charger_manager.fee_model_global.fee_num[i];
|
||||
const char *fee_name;
|
||||
|
||||
switch (current_type)
|
||||
{
|
||||
case 0x00:
|
||||
fee_name = "尖时";
|
||||
break;
|
||||
case 0x01:
|
||||
fee_name = "峰时";
|
||||
break;
|
||||
case 0x02:
|
||||
fee_name = "平时";
|
||||
break;
|
||||
case 0x03:
|
||||
fee_name = "谷时";
|
||||
break;
|
||||
default:
|
||||
fee_name = "未知";
|
||||
break;
|
||||
}
|
||||
|
||||
// 起始时间（第 i 个半小时段）
|
||||
int start_hour = i / 2;
|
||||
int start_min = (i % 2) * 30;
|
||||
|
||||
// 向后查找连续相同费率的结束位置
|
||||
int j = i;
|
||||
while (j < 48 && g_charger_manager.fee_model_global.fee_num[j] == current_type)
|
||||
{
|
||||
j++;
|
||||
}
|
||||
// j 是第一个不等于 current_type 的位置，所以结束段是 j-1
|
||||
int end_idx = j - 1;
|
||||
int end_hour = (end_idx + 1) / 2; // 结束时间是 (end_idx+1) 对应的半小时起点
|
||||
int end_min = ((end_idx + 1) % 2) * 30;
|
||||
|
||||
// 处理跨天：24:00 显示为 00:00
|
||||
if (end_hour == 24)
|
||||
{
|
||||
end_hour = 0;
|
||||
}
|
||||
|
||||
printf("%02d:%02d-%02d:%02d 为 %s 费率\r",
|
||||
start_hour, start_min,
|
||||
end_hour, end_min,
|
||||
fee_name);
|
||||
i = j; // 跳到下一个不同费率段
|
||||
}
|
||||
printf("================================================================\r\n");
|
||||
charger_to_server_0x57(stake_index);
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
// 平台控制充电
|
||||
void on_cmd_frame_type_0X34(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X34 data;
|
||||
uint8_t result = TRUE; // 默认启动结果成功
|
||||
uint8_t err_code = 0; // 默认错误码为0
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X34));
|
||||
set_trade_serial(stake_index, data.gun_index, data.trade_serial);
|
||||
printf("北向：平台控制充电,桩ID:%d, 枪ID:%d, 金额:%d\r\n", stake_index, data.gun_index, data.remain_money);
|
||||
|
||||
uint8_t *trade_serial = data.trade_serial;
|
||||
|
||||
memcpy(g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.trade_serial, data.trade_serial, 16);
|
||||
|
||||
if (!is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x1; // 桩编号不匹配
|
||||
}
|
||||
else if (g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.status == 3)
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x2; // 枪在使用
|
||||
}
|
||||
else if (g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.status == 1)
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x3; // 枪故障
|
||||
}
|
||||
else if (g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.status == 0)
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x4; // 枪离线
|
||||
}
|
||||
else if (g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.gun_is_insert == FALSE)
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x5; // 未插枪
|
||||
}
|
||||
|
||||
charger_to_server_0X33(stake_index, data.gun_index, result, err_code);
|
||||
}
|
||||
|
||||
// 平台控制停止充电
|
||||
void on_cmd_frame_type_0X36(uint8_t stake_index, SERVER_PACK *pack)
|
||||
{
|
||||
PACK_DATA_0X36 data;
|
||||
uint8_t result = TRUE; // 默认启动结果成功
|
||||
uint8_t err_code = 0; // 默认错误码为0
|
||||
memcpy(&data, pack->data, sizeof(PACK_DATA_0X36));
|
||||
printf("北向：平台控制停止充电,桩ID:%d, 枪ID:%d\r\n", stake_index, data.gun_index);
|
||||
|
||||
if (!is_my_charger_serial(stake_index, data.charger_serial))
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x1; // 桩编号不匹配
|
||||
}
|
||||
else if (g_charger_manager.charger_piles[stake_index - 1].guns[data.gun_index - 1].real_time_data.status != 3)
|
||||
{
|
||||
result = 0;
|
||||
err_code = 0x2; // 枪未在使用
|
||||
}
|
||||
|
||||
charger_to_server_0X33(stake_index, data.gun_index, result, err_code);
|
||||
}
|
||||
@@ -1,14 +0,0 @@
|
||||
#ifndef __SERVER_TO_CHARGER_H__
|
||||
#define __SERVER_TO_CHARGER_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "server_common.h"
|
||||
|
||||
void on_cmd_frame_type_0X02(uint8_t stake_index,SERVER_PACK *pack);
|
||||
void on_cmd_frame_type_0X04(uint8_t stake_index,SERVER_PACK *pack);
|
||||
void on_cmd_frame_type_0X0A(uint8_t stake_index,SERVER_PACK *pack);
|
||||
void on_cmd_frame_type_0X06(uint8_t stake_index,SERVER_PACK *pack);
|
||||
void on_cmd_frame_type_0X58(uint8_t stake_index,SERVER_PACK *pack);
|
||||
void on_cmd_frame_type_0X34(uint8_t stake_index,SERVER_PACK *pack);
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user